Asus TUF Z390-PRO GAMING Manual Download Page 79

Page: 79 / 88

TUF Z390-PRO GAMING

3-27

Chapter 3

3.11.3

ASUS CrashFree BIOS 3

The ASUS CrashFree BIOS 3 utility is an auto recovery tool that allows you to restore the

BIOS file when it fails or gets corrupted during the updating process. You can restore a

corrupted BIOS file using a USB flash drive that contains the BIOS file.

Download the file at https://www.asus.com/support/ and save it to a USB flash drive.

Recovering the BIOS

To recover the BIOS:

Turn on the system.

Insert the USB flash drive containing the BIOS file to the USB port.

The utility automatically checks the devices for the BIOS file. When found, the utility

reads the BIOS file and enters ASUS EZ Flash 3 automatically.

The system requires you to enter BIOS Setup to recover the BIOS setting. To ensure

system compatibility and stability, we recommend that you press <F5> to load default

BIOS values.

DO NOT shut down or reset the system while updating the BIOS! Doing so can cause

system boot failure!

Summary of Contents for TUF Z390-PRO GAMING

























































































Search results

Summary of Contents for TUF Z390-PRO GAMING

Reviews:

Related manuals for TUF Z390-PRO GAMING

Brands by name

Popular brands

Asus TUF Z390-PRO GAMING, Manual

Search results

Summary of Contents for TUF Z390-PRO GAMING

Reviews:

Related manuals for TUF Z390-PRO GAMING

Brands by name

Popular brands