Asus TUF Z390-PRO GAMING Manual Download Page 28

Page: 28 / 88

1-14

Chapter 1: Product Introduction

Chapter 1

Front panel audio connector (10-1 pin AAFP)

This connector is for a chassis-mounted front panel audio I/O module that supports

HD Audio standard. Connect one end of the front panel audio I/O module cable to this

connector.

We recommend that you connect a high-definition front panel audio module to this

connector to avail of the motherboard’s high-definition audio capability.

USB 3.1 Gen 1 connectors (20-1 pin U31G1_78; U31G1_910)

These connectors allow you to connect a USB 3.1 Gen 1 module for additional USB

3.1 Gen 1 front or rear panel ports. With an installed USB 3.1 Gen 1 module, you can

enjoy all the benefits of USB 3.1 Gen 1 including faster data transfer speeds of up to

5 Gb/s, faster charging time for USB-chargeable devices, optimized power efficiency,

and backward compatibility with USB 2.0.

The USB 3.1 Gen 1 module is purchased separately.

Summary of Contents for TUF Z390-PRO GAMING

























































































Search results

Summary of Contents for TUF Z390-PRO GAMING

Reviews:

Related manuals for TUF Z390-PRO GAMING

Brands by name

Popular brands

Asus TUF Z390-PRO GAMING, Manual

Search results

Summary of Contents for TUF Z390-PRO GAMING

Reviews:

Related manuals for TUF Z390-PRO GAMING

Brands by name

Popular brands