ASUS TUF GAMING B450-PLUS II
2-5
2.5
RAID configurations
The motherboard comes with the RaidXpert2 Configuration Utility that supports RAID 0,
RAID 1 and RAID 10 configuration.
RAID definitions
RAID 0 (Data striping)
optimizes two identical hard disk drives to read and write data in
parallel, interleaved stacks. Two hard disks perform the same work as a single drive but at a
sustained data transfer rate, double that of a single disk alone, thus improving data access
and storage. Use of two new identical hard disk drives is required for this setup.
RAID 1 (Data mirroring)
copies and maintains an identical image of data from one drive to
a second drive. If one drive fails, the disk array management software directs all applications
to the surviving drive as it contains a complete copy of the data in the other drive. This RAID
configuration provides data protection and increases fault tolerance to the entire system. Use
two new drives or use an existing drive and a new drive for this setup. The new drive must be
of the same size or larger than the existing drive.
RAID 10
is data striping and data mirroring combined without parity (redundancy data) having
to be calculated and written. With the RAID 10 configuration you get all the benefits of both
RAID 0 and RAID 1 configurations. Use four new hard disk drives or use an existing drive
and three new drives for this setup.
For more information on configuring your RAID sets, please
refer to the
RAID Configuration Guide
which you can find at
https://www.asus.com/support, or by scanning the QR code.
E17223_TUF_GAMING_B450-PLUS_II_UM.indb 5
E17223_TUF_GAMING_B450-PLUS_II_UM.indb 5
2020/9/16 9:30:15
2020/9/16 9:30:15
