Asus TS700-E8-PS4 User Manual Download Page 91

Page: 91 / 210

5-3

ASUS TS700-E8-PS4, TS700-E8-RS8

Press <Tab> to switch to the

Drive

field.

Press the Up/Down arrow keys to find the USB flash disk that contains the latest BIOS,

then press <Enter>.

Press <Tab> to switch to the

Folder Info

field.

5.1.2

ASUS EZ Flash Utility

The ASUS EZ Flash Utility feature allows you to update the BIOS without having to use a

DOS-based utility.

Before you start using this utility, download the latest BIOS from the ASUS website at

www.asus.com.

To update the BIOS using EZ Flash Utility:

Insert the USB flash disk that contains the latest BIOS file into the USB port.

Enter the BIOS setup program. Go to the

Tool

menu then select

ASUS

EZ Flash

Utility

. Press <Enter>.

Current Platform

Platform : Z10PE-D16 WS

Version : 0215

Build date: 05/13/2014

New Platform

Platform : Z10PE-D16 WS

Version : 0217

Build date: 06/30/2014

ASUS Tek. EzFlash Utility

FS0

FS1

[Up/Down/Left/Right]:Switch [Enter]:Choose [q]:Exit

Press the Up/Down arrow keys to find the BIOS file, and then press <Enter> to perform

the BIOS update process. Reboot the system when the update process is done.

•

This function can support devices such as a USB flash disk with FAT 32/16 format and

single partition only.

•

DO NOT shut down or reset the system while updating the BIOS to prevent system

boot failure!

Ensure to load the BIOS default settings to ensure system compatibility and stability. Press

<F5> and select

Yes

to load the BIOS default settings.

Summary of Contents for TS700-E8-PS4



















































































































































































































Search results

Summary of Contents for TS700-E8-PS4

Reviews:

Related manuals for TS700-E8-PS4

Brands by name

Popular brands

Asus TS700-E8-PS4, User Manual

Search results

Summary of Contents for TS700-E8-PS4

Reviews:

Related manuals for TS700-E8-PS4

Brands by name

Popular brands