Asus TS700-E8-PS4 User Manual Download Page 200

Page: 200 / 210

7-16

Chapter 7: Driver installation

7.4

Installing the drivers and utilities

This section provides instructions and guidelines on how to install the required drivers,

management applications, and optional utilities from the support DVD.

7.4.1

Using the ASUS InstAll application

This sections describes how to install the drivers and utilities using ASUS InstAll, an ASUS

exclusive installation wizard that allows you to conveniently install the drivers and utilities with

just a few steps.

To install drivers and utilities using ASUS InstAll:

Restart the computer, and then log on with Administrator privileges.

Insert the motherboard/system support DVD into the optical drive. The support DVD

automatically displays the

Drivers

menu if Autorun is enabled in your computer.

If Autorun is NOT enabled in your computer, browse the contents of the support DVD to

locate the file

ASSETUP.EXE

from the

BIN

folder. Double-click the

ASSETUP.EXE

to run

the support DVD.

From the Drivers tab, click

ASUS InstAll

Drivers Installation Wizard

Summary of Contents for TS700-E8-PS4



















































































































































































































Search results

Summary of Contents for TS700-E8-PS4

Reviews:

Related manuals for TS700-E8-PS4

Brands by name

Popular brands

Asus TS700-E8-PS4, User Manual

Search results

Summary of Contents for TS700-E8-PS4

Reviews:

Related manuals for TS700-E8-PS4

Brands by name

Popular brands