manualshive.com logo in svg

Asus TS700-E8-PS4, User Manual, Page: 112 / 210

Share
Download
Asus TS700-E8-PS4 User Manual Download Page 112

5-24

Chapter 5: BIOS setup

5.5.10  CSM Configuration

CSM Support [Enabled]

This option allows you to enable or disable CSM Support. 

Configuration options: [Disabled] [Enabled]

GateA20 Active [Upon Request]

This allows you to set the GA20 option.

Configuration options: [Upon Request] [Always] 

Option ROM Messages [Force BIOS]

This allows you to set the display mode for option ROM.

Configuration options: [Force BIOS] [Keep Current]

Boot Option filter [Legacy only]

This option allows you to control the Legacy/UEFI ROMs priority.

Configuration options: [UEFI and Legacy] [Legacy only] [UEFI only]

Network / Storage / Video [Legacy]

This option allows you to control the execution of UEFI and Legacy PXE/ Storage/ Video 

OpROM.

Configuration options: [UEFI ] [Legacy] 

Other PCI devices [Legacy]

This item determines the OpROM execution policy for devices other than Network, Storage, 

or Video. 

Configuration options: [UEFI ] [Legacy] 

Summary of Contents for TS700-E8-PS4



















































































































































































































Reviews:

No comments