Asus TS300-E9-PS4 User Manual Download Page 109

Page: 109 / 166

5-25

ASUS TS300-E9-PS4

5.4.4

CPU Configuration

The items in this menu show the CPU-related information that the BIOS automatically

detects. Some items may not appear if your CPU does not support the related functions.

To quickly go to the last item of the second page, press the

Page Down

button. Press the

Page Up

button to go back to the first item in the first page.

Navigate to the second page of the screen to see the rest of items in this menu by pressing

the Up or Down arrow keys.

Hyper-threading [Enabled]

This item allows a hyper-threading processor to appear as two logical processors, allowing

the operating system to schedule two threads or processors simultaneously.

Configuration options: [Disabled] [Enabled]

Active Processor Cores [All]

Allows you to choose the number of CPU cores to activate in each processor package.

Configuration options: [All] [1] [2] [3]

Intel Virtualization Technology [Enabled]

When enabled, a VMM can utilize the additional hardware capabilities provided by

Vanderpool Technology.

Configuration options: [Disabled] [Enabled]

Summary of Contents for TS300-E9-PS4







































































































































































Search results

Summary of Contents for TS300-E9-PS4

Reviews:

Asus TS300-E9-PS4, User Manual, Page: 109 / 166

Search results

Summary of Contents for TS300-E9-PS4

Reviews: