manualshive.com logo in svg

Asus TS110-E8-PI4, User Manual

Share
Download
Asus TS110-E8-PI4 User Manual Download Page 71

ASUS TS110-E8-PI4

4-15

4.4.2 

PCH-IO Configuration

Allows you to configure PCH parameters.

Aptio Setup Utility - Copyright (C) 2014 American Megatrends, Inc.

        Advanced

Intel PCH RC Version 

1.0.0.0 

Intel PCH SKU Name 

C222 

Intel PCH Rev ID 

04/C1

 USB Configuration

 PCH Azalia Configuration

USB Configuration 

settings.

USB Configuration

Allows you to set the USB Configuration settings.

USB Configuration settings

Aptio Setup Utility - Copyright (C) 2014 American Megatrends, Inc.

        Advanced

Mode of operation of xHCI 

controller.

USB Configuration

XHCI Mode 

[Auto]

EHCI1      

[Enabled]

EHCI2      

[Enabled]

USB Ports Per-Port Disable Control [Disabled]

XHCI Mode [Auto]

Allows you to set the mode of operation of the xHCI controller. Configuration options: [Auto] 

[Enabled] [Disabled] 

EHCI1 / EHCI2 [Enabled]

Allows you to control the USB EHCI (USB 2.0) functions. One EHCI controller must always 

be enabled. Configuration options: [Disabled] [Enabled]

USB Ports Per-Port Disable Control [Disabled]

Allows you to control the disabling of the USB ports (0-13). Configuration options: 
[Disabled] [Enabled]

USB Port #0-#13 Disable [Enabled]

This items only appears when you set the USB Ports Per-Port Disable Control to 

[Enabled]

This item allows you to control the disabling of each of the USB ports (0-13). 

Configuration options: [Disabled] [Enabled]

Summary of Contents for TS110-E8-PI4



















































































































































Reviews:

No comments

Brands by name

Popular brands

Load more brands