Asus T-P5G43 User Manual Download Page 96

Page: 96 / 104

5-34

Chapter 5: BIOS setup

The following items appear only in some models with LED Display features.

5.7.3

LED Poster Configuration

Turn On/Off LED Timer Display

[Enabled]

LED Poster Backlight

Turn On / Off LED Timer Display [Enabled]

Allows you to enable or disable the LED Timer Display feature.

Configuration options:

[Enabled]:

It is set to [Enabled] by default. The LED Timer is displayed either when

the system is turned on or off.

[Disabled]:

The LED Timer is not displayed either when the system is turned on or

off.

[Disable of Shutdown]:

The LED Timer is displayed when the system is turned

on. When the system is turned off, the LED Timer is not displayed.

LED Poster Backlight [100%]

Allows you to set the LED poster backlight. Configuration options: [25%] [50%]

[75%] [100%]

Summary of Contents for T-P5G43









































































































Search results

Summary of Contents for T-P5G43

Reviews:

Related manuals for T-P5G43

Brands by name

Popular brands

Asus T-P5G43, User Manual

Search results

Summary of Contents for T-P5G43

Reviews:

Related manuals for T-P5G43

Brands by name

Popular brands