Asus T-P5G43 User Manual Download Page 103

Page: 103 / 104

A-5

ASUS T-P5P43

A.4

Integrating AHCI driver to Windows

XP installation

nLite allows you to integrate the AHCI driver into the Windows

XP installation file.

The integrated driver is installed to the system when you install Windows

XP.

To integrate the AHCI driver into the Windows

XP installation:

1. Install nLite application. Go to nLite website (http://www.nliteos.com) to

download the installation file.

2. Create a new folder and name it WinXP, then copy all files from the

Windows

XP OS installation disc to the WinXP folder.

3. Create another new folder and name it AHCI, then copy all files under

Drivers/RAID/Driver/32bit

64bit

in the Support CD to the AHCI folder.

4. Run the nLite application. Select a display language, then click

Next

. By

default, the display language is English.

5. Click

Browse

and select the

WinXP folder containing the

Windows

XP installation files,

then click

. Click

Next

6. Click

Next

. From the Task

Selection window, select

Drivers

and

Bootable ISO

, then click

Next

Summary of Contents for T-P5G43









































































































Search results

Summary of Contents for T-P5G43

Reviews:

Related manuals for T-P5G43

Brands by name

Popular brands

Asus T-P5G43, User Manual

Search results

Summary of Contents for T-P5G43

Reviews:

Related manuals for T-P5G43

Brands by name

Popular brands