The OSD (On-Screen Display) menu
40
Screen menu
PAP Setting
Display Wall
Aspect
Full 2
Adjust Screen
Freeze
Off
Screen
:Move
:Enter
:Exit
Enter
Exit
Item
Description
PAP Setting
(Picture and
Picture)
•
PAP:
Turns on or off the PIP (Picture in Picture) and PBP (Picture by
Picture) functions.
•
Active Picture
: For the PIP, selects the main or sub picture to operate. For
the PBP, selects the left or right picture to operate. Swaps the main/ sub or
left/right pictures.
•
Picture Size
: Changes the size of the sub picture.
•
Picture Position
: (PIP only) Changes the position of the sub picture.
Notes:
• PAP is not available for all signal source combinations. See "Supported PAP input
signal combination" on page 63 for more information on supported combinations.
• In PAP mode, only sound from the active picture will be available.
Display Wall
•
H. Monitors
/
V. Monitors
: Sets the number of displays used in the
horizontal/vertical direction.
•
H. Position/V. Position
: Sets the horizontal/vertical position of the display
wall matrix.
•
Frame Comp.
: Adjusts images near the display edges for optimal
demonstration across the display wall.
•
LED
: Turns the power indicator on the display on or off.
•
Power On Delay
: Choose to enable or disable a sequence in turning on the
screen matrix. If enabled, the display will turn on with a maximum of 10-
second delay.
Aspect
Sets the picture’s aspect ratio.
•
Wide Zoom
: Enlarges to fill screen with minimum distortion.
•
Zoom
: Enlarges the picture, keeping the same aspect ratio.
