Connection
15
Connecting the YPbPr component video input
1.
Connect the
VIDEO IN (YPbPr)
jacks on the display to the component video output
jacks on an A/V device (such as a VCR or DVD player) using a component video cable.
2.
Connect the A/V device’s audio output jacks to the
AUDIO IN (AUDIO2)
jacks on the
display using a suitable audio cable. To select an appropriate audio source, see "Audio
Source" on page 39 for details.
3.
To view video image from this input, press the
YPbPr
button on the remote control, or
select
YPbPr
from the source selection bar.
Note:
• The cables are not supplied and should be purchased separately.
RS-232C-OUT
RS-232C-IN
Audio cable
DVD player / VCR
Component video cable
