Asus SABERTOOTH Z77 User Manual Download Page 133

Page: 133 / 178

ASUS SABERTOOTH Z77

4-19

Chapter 4

4.3.8

USB 3.0 Boost

The ASUS exclusive USB 3.0 Boost provides speed boost for USB 3.0 devices and the

up-to-date support of USB Attached SCSI Protocol (UASP). With USB 3.0 Boost, you can

accelerate the transfer speed of your USB 3.0 devices with ease.

Launching USB 3.0 Boost

After installing AI Suite II from the motherboard support DVD, launch USB 3.0 Boost by

clicking

Tool > USB 3.0 Boost

on the AI Suite II main menu bar.

Configuring USB 3.0 Boost

Connect a USB 3.0 device to the USB 3.0 port.

USB 3.0 Boost automatically detects the property of the connected device and

switches to

Turbo

mode or

UASP

mode (if UASP is supported by the connected

device).

You can manually switch the USB 3.0 mode back to

Normal

mode at any time.

Refer to the software manual in the support DVD or visit the ASUS website at

www.asus.com for detailed software configuration.

Summary of Contents for SABERTOOTH Z77



















































































































































































Search results

Summary of Contents for SABERTOOTH Z77

Reviews:

Related manuals for SABERTOOTH Z77

Brands by name

Popular brands

Asus SABERTOOTH Z77, User Manual

Search results

Summary of Contents for SABERTOOTH Z77

Reviews:

Related manuals for SABERTOOTH Z77

Brands by name

Popular brands