
ASUS SABERTOOTH 55i
3-37
Chapter 3
3.9.3
AI NET 2
Check Realtek LAN cable [Disabled]
[Disabled]
BIOS will not check the Realtek LAN cable during the Power-On Self-Test
(POST).
[Enabled]
BIOS checks the Realtek LAN cable during the Power-On Self-Test (POST).
3.9.4
ASUS EZ Flash 2
Allows you to run ASUS EZ Flash 2. When you press <Enter>, a confirmation message
appears. Use the left/right arrow key to select between [Yes] or [No], then press <Enter> to
confirm your choice.
For more details, refer to
section 3.2.2 ASUS EZ Flash 2 utility
.
Update To Normal Mode [Press Enter]
Allows you to use the SATA_E1 (orange) and SATA_E2 (white) connectors as normal
SATA connectors.
When using only one hard disk in
Normal Mode
, connect the hard disk to the SATA_E1
(orange) connector on the motherboard.
Create Ultra Space [Press Enter]
This item appears only when you created a
Super Speed
or a
EZ Backup
set using
two hard drives with different capacity
and allows you to create a single drive
partition using all the drive space unused by Drive Xpert.
Delete Ultra Space [Press Enter]
This item appears only when you have created a drive partition using the
Ultra Space
function. All data stored in the Ultra Space partition will be erased.
Drive Xpert Device(s) List:
SATA_E1 (Orange) / SATA_E2 (White)
Press <Enter> to display the information of the hard disks which are connected to the
SATA_E1 (orange) and SATA_E2 (white) connectors on the motherboard.
AI NET 2
Pair Status Length
Check Realtek LAN cable
[Disabled]
BIOS SETUP UTILITY
Tools
Summary of Contents for SABERTOOTH 55i - Motherboard - ATX
Page 1: ...Motherboard SABERTOOTH 55i ...
Page 14: ...xiv ...
Page 20: ...1 6 Chapter 1 Product Introduction Chapter 1 ...
Page 62: ...2 42 Chapter 2 Hardware information Chapter 2 ...