ASUS S1-AT5NM10E
4-21
4.5.5
APM Configuration
Restore on AC Power Loss [Power Off]
When set to [Power Off], the system goes into off state after an AC power loss.
When set to [Power On], the system goes on after an AC power loss. When set to
[Last State], the system goes into either off or on state, whatever the system state
was before the AC power loss. Configuration options: [Power Off] [Power On]
[Last State]
Resume On By RTC Alarm [Disabled]
Allows you to enable or disable RTC to generate a wake event. When this item is
set to Enabled, the items RTC Alarm Date, RTC Alarm Hour, RTC Alarm Minute,
and RTC Alarm Second appear with set values. Configuration options: [Disabled]
[Enabled]
Power On By Ring [Disabled]
Allows you to enable or disable RI to generate a wake event.
Configuration options: [Disabled] [Enabled]
Power On By PME [Disabled]
Enables or disables PME wake from sleep states. Configuration options: [Disabled]
[Enabled]
Power On By Remote Control [Disabled]
Enables or disables a remote control to power up the system or wake up the
system from S3, S4, and S5 sleep states. Configuration options: [Enabled]
[Disabled]
Select Screen
Select Item
+- Change Option
F1 General Help
F10 Save and Exit
ESC Exit
Restore on AC Power Loss
[Power off]
Resume On RTC Alarm
[Disabled]
Power On By Ring
[Disabled]
Power On By PME
[Disabled]
Power On By Remote Control
[Disabled]
S1-AT5NM10E BIOS Setup Version 0103
Power
Power Off
Power On
Last State
Options
