Asus RT-AX1800U User Manual Download

Page: 15 / 95

2.2 Quick Internet Setup (QIS) with Auto-

detection

The Quick Internet Setup (QIS) function guides you in quickly

setting up your Internet connection.

NOTE:

When setting the Internet connection for the first time, press

the Reset button on your wireless router to reset it to its factory default

settings.

To use QIS with auto-detection:

1. Log into the Web GUI. The QIS page launches automatically.

NOTES:

• By default, the login username and password for your wireless

router's Web GUI is

admin

. For details on changing your wireless

router's login username and password, refer to section

4.6.2 System

• The wireless router's login username and password is different from

the 2.4GHz/5GHz network name (SSID) and security key. The wireless

router's login username and password allows you to log into your

wireless router's Web GUI to configure your wireless router's settings.

The 2.4GHz/5GHz network name (SSID) and security key allows Wi-Fi

devices to log in and connect to your 2.4GHz/5GHz network.

Summary of Contents for RT-AX1800U
































































































Search results

Summary of Contents for RT-AX1800U

Reviews:

Related manuals for RT-AX1800U

Brands by name

Popular brands

Asus RT-AX1800U, User Manual

Search results

Summary of Contents for RT-AX1800U

Reviews:

Related manuals for RT-AX1800U

Brands by name

Popular brands