Asus RT-AC58U Page 78 User Manual Download

Page: 78 / 124

4.6.3 Firmware Upgrade

NOTE: Download the latest firmware from the ASUS website at

http://www.asus.com

To upgrade the firmware:
1. From the navigation panel, go to Advanced Settings >

Administration > Firmware Upgrade tab.

2. In the New Firmware File field, click Browse to locate the

downloaded file.

3. Click Upload.

NOTES:

• When the upgrade process is complete, wait for some time for the

system to reboot.

• If the upgrade process fails, the wireless router automatically enters

rescue mode and the power LED indicator on the front panel starts

flashing slowly. To recover or restore the system, refer to section 5.2

Firmware Restoration.

4.6.4 Restore/Save/Upload Setting

To restore/save/upload wireless router settings:
1. From the navigation panel, go to Advanced Settings >

Administration > Restore/Save/Upload Setting tab.

2. Select the tasks that you want to do:

• To restore to the default factory settings, click Restore, and

click OK in the confirmation message.

• To save the current system settings, click Save, navigate to

the folder where you intend to save the file and click Save.

• To restore from a saved system settings file, click Browse to

locate your file, then click Upload.

IMPORTANT!

If issues occur, upload the latest firmware version and

configure new settings. Do not restore the router to its default settings.

Summary of Contents for RT-AC58U





























































































































Search results

Summary of Contents for RT-AC58U

Reviews:

Related manuals for RT-AC58U

Brands by name

Popular brands

Asus RT-AC58U, User Manual

Search results

Summary of Contents for RT-AC58U

Reviews:

Related manuals for RT-AC58U

Brands by name

Popular brands