Asus RS720QA-E6/RS12, User Manual

Page: 96 / 150

5-28 Chapter 5: BIOS setup
5.6 Power menu
v02.61 (C)Copyright 1985-2010, American Megatrends, Inc.
BIOS SETUP UTILITY
Main Advanced Server Power Boot Tools Exit
ACPI APIC support [Enabled]
APM Configuration
Hardware Monitor
←→
Select Screen
↑↓
Select Item
+- Change Option
F1 General Help
F10 Save and Exit
ESC Exit
Include ACPI APIC
table pointer to
RSDT pointer list.
5.6.1 ACPI APIC Support [Enabled]
Allows you to enable or disable the Advanced Configuration and Power Interface
(ACPI) support in the Advanced Programmable Interrupt Controller (APIC). When
set to [Enabled], the ACPI APIC table pointer is included in the RSDT pointer list.
Configuration options: [Disabled] [Enabled]
5.6.2 APM Configuration
Restore on AC Power Loss [Last State]
When set to [Power Off], the system goes into off state after an AC power loss.
When set to [Power On], the system will reboot after an AC power loss. When set
to [Last State], the system goes into either off or on state, whatever the system
state was before the AC power loss.
Configuration options: [Power Off] [Power On] [Last State]
Power On PCIE Wake# [Disabled]
Allows you to enable or disable the PCIE devices to generate a wake event.
[Disabled] Disables the PCIE devices to generate a wake event.
[Enabled] Enables the PCIE devices to generate a wake event.
Power On Configuration
Restore on AC Power Loss [Last State]
Power On PCIE Wake# [Disabled]
Power On Ring [Disabled]
Power On RTC Alarm [Disabled]
BIOS SETUP UTILITY
Power
Options
Power On
Power Off
Last State