manualshive.com logo in svg

Asus RS720QA-E6/RS12, User Manual

Share
Download
Asus RS720QA-E6/RS12 User Manual Download Page 35

2-15

ASUS RS720QA-E6/RS12, RS724QA-E6/RS12

2.5.2 

Configuring an expansion card

After installing the expansion card, configure it by adjusting the software settings.
1.  Turn on the system and change the necessary BIOS settings, if any. See 

Chapter 5 for information on BIOS setup.

2.  Assign an IRQ to the card. Refer to the following tables.

3.  Install the software drivers for the expansion card.

* These IRQs are usually available for ISA or PCI devices.

Standard Interrupt assignments

IRQ

Priority Standard function

0

1

System Timer

1

2

Keyboard Controller

2

-

Programmable Interrupt

4*

12

Communications Port (COM1)

5*

13

--

6

14

Floppy Disk Controller

7*

15

--

8

3

System CMOS/Real Time Clock

9*

4

ACPI Mode when used

10*

5

IRQ Holder for PCI Steering

11*

6

IRQ Holder for PCI Steering

12*

7

PS/2 Compatible Mouse Port

13

8

Numeric Data Processor

14*

9

Primary IDE Channel

15*

10

Secondary IDE Channel

5.  Press the riser card bracket until 

the golden connectors completely 

fit the slot and the bracket aligns 

with the rear panel.

6.  Connect the cable(s) to the card, if 

applicable.

Summary of Contents for RS720QA-E6/RS12























































































































































Reviews:

No comments

Brands by name

Popular brands

Load more brands