Asus RS720QA-E6/RS12 User Manual Download Page 27

Page: 27 / 150

2-7

ASUS RS720QA-E6/RS12, RS724QA-E6/RS12

2.2.2

Installing the CPU heatsink

The AMD Opteron™ 6100 series processors require a specially designed heatsink

to ensure optimum thermal condition and performance.

• Ensure to use qualified heatsink assembly with dimension 90mm x 90mm x

27mm only.

• Ensure that you have applied the thermal grease to the top of the CPU

before installing the heatsink and fan.

Follow these steps to install the CPU heatsink and fan.
1. Locate the heatsink standoffs on the motherboard.

2. Use a Phillips screwdriver to tighten the four heatsink screws in a diagonal

sequence, ensuring that the screw holes are matched with the heatsink

standoffs.

Ensure that the heatsink is not skewed or tilted, otherwise the CPU will overheat.

Summary of Contents for RS720QA-E6/RS12























































































































































Search results

Summary of Contents for RS720QA-E6/RS12

Reviews:

Brands by name

Popular brands

Asus RS720QA-E6/RS12, User Manual

Search results

Summary of Contents for RS720QA-E6/RS12

Reviews:

Brands by name

Popular brands