Asus RS720Q-E9-RS24-S User Manual Download

Page: 20 / 150

Chapter 1: Product Introduction

1-8

1.6

Internal features

The barebone server includes the basic components as shown.

*WARNING

HAZARDOUS MOVING PARTS

KEEP FINGERS AND OTHER BODY PARTS AWAY

Turn off the system power and detach the power supply before removing or replacing any

system component.

Front LED Boards

Hot-swap storage device trays

3. Backplane

System fan (SYS_FAN1)

System fan (SYS_FAN2)

System fan (SYS_FAN3)

System fan (SYS_FAN4)

BP_FAN1 (top) and BP_FAN2 (bottom)

SATA/SAS/NVMe Mid-plane

10. ASUS Z11PH-D12 Server Board

11. Power supply and power fan

Ensure that the air duct is positioned on the gaps between the memory slots.

Summary of Contents for RS720Q-E9-RS24-S























































































































































Search results

Summary of Contents for RS720Q-E9-RS24-S

Reviews:

Related manuals for RS720Q-E9-RS24-S

Brands by name

Popular brands

Asus RS720Q-E9-RS24-S, User Manual

Search results

Summary of Contents for RS720Q-E9-RS24-S

Reviews:

Related manuals for RS720Q-E9-RS24-S

Brands by name

Popular brands