Asus RS720Q-E7/RS12 User Manual Download Page 181

Page: 181 / 202

7-23

ASUS RS720Q-E7/RS12, RS724Q-E7/RS12, RS726Q-E7/RS12

7.5

Intel

C600 Series Chipset SATA RAID

Drivers

This section provides the instructions on how to install the

Intel

C600 Series

Chipset SATA RAID Drivers

on the system.

You need to manually install the Intel

C600 Series Chipset SATA RAID Drivers on

a Windows operating system.

To install the drivers:
1. Restart the computer, and then log on with

Administrator

privileges.

2. Insert the motherboard/system support DVD to the optical drive. The support

DVD automatically displays the

Drivers

menu if Autorun is enabled in your

computer.

If Autorun is NOT enabled in your computer, browse the contents of the support

DVD to locate the file

ASSETUP.EXE

from the

BIN

folder. Double-click the

ASSETUP.EXE

to run the support DVD.

3. Click the item

Intel

C600 Series Chipset RAID Drivers

from the menu, and

then follow the onscreen instructions to complete the installation.

Summary of Contents for RS720Q-E7/RS12











































































































































































































Search results

Summary of Contents for RS720Q-E7/RS12

Reviews:

Related manuals for RS720Q-E7/RS12

Brands by name

Popular brands

Asus RS720Q-E7/RS12, User Manual

Search results

Summary of Contents for RS720Q-E7/RS12

Reviews:

Related manuals for RS720Q-E7/RS12

Brands by name

Popular brands