Asus RS720Q-E7/RS12, User Manual

Page: 105 / 202

5-33 ASUS RS720Q-E7/RS12, RS724Q-E7/RS12, RS726Q-E7/RS12
5.4.15 ME Subsystem
Intel ME Subsystem Configuration
ME BIOS Interface Version 0.0
ME Version 0.0.0.0
ME FW Status Value : 0x0
ME FW State : SPS ME FW Active
ME FW Operation State: M0 without UMA
ME FW Error Code: No Error
ME Ext FW Status value: 0x0
BIOS Booting Mode: Performance ptimized
Cores Disabled: 0
ME FW SKU Information: SiEn NM
5.4.16 Legacy Devices Configuration
Serial Port 1 Configuration
Serial Port 2 Configuration
Serial Port 1/2 Configuration
Serial Port Configuration
Serial Port [Enabled]
Device Settings I0=3F8h; IRQ=4
Device Mode [Standard Serial Po...]
→←:
Select Screen
↑↓:
Select Item
Enter: Select Item
+/-: Change Opt.
F1: General Help
F2: Previous Values
F5: Optimized Defaults
F10: Save & Exit
ESC: Exit
Aptio Setup Utility - Copyright (C) 2011 American Megatrends, Inc.
Advanced
Aptio Setup Utility - Copyright (C) 2011 American Megatrends, Inc.
Advanced
Aptio Setup Utility - Copyright (C) 2011 American Megatrends, Inc.
Advanced
Version 2.14.1219. Copyright (C) 2011 American Megatrends, Inc.
ME Subsystem Help.
Set Parameters of serial
Port 1(COM1).
Enable or Disable Serial
Port(COM).