Asus RS720-E9-RS24-E User Manual Download Page 155

Page: 155 / 180

6-15

ASUS RS720-E9-RS24-E

6.3.2

Changing a Volume Type

To change the volume type in

Volume Properties

Click the SATA array items you want to change in

Volumes

field.

From the

Volume Properties

field, select

Type: RAID 1 Change type

We recommend a lower stripe size for server systems, and a higher stripe size for

multimedia computer systems used mainly for audio and video editing.

You can change the

Name

Select the new volume type

, and

Select additional

disks to include in the new volume

if needed.

Select the

Data stripe size

for the RAID array (for RAID 0, 10 and 5 only), and click

. The available stripe size values range from 4 KB to 128 KB. The following are

typical values:

RAID 0: 128KB

RAID 10: 64KB

RAID 5: 64KB

Summary of Contents for RS720-E9-RS24-E





















































































































































































Search results

Summary of Contents for RS720-E9-RS24-E

Reviews:

Asus RS720-E9-RS24-E, User Manual, Page: 155 / 180

Search results

Summary of Contents for RS720-E9-RS24-E

Reviews: