Asus RS720-E8-RS24-ECP User Manual Download Page 184

Page: 184 / 192

7-22

Chapter 7: Driver Installation

7.6

VGA driver installation

This section provides the instructions on how to install the ASPEED Video Graphics Adapter

(VGA) driver.
You need to manually install the ASPEED VGA driver on a Windows

operating system.

To install the ASPEED VGA driver:

Restart the computer and then log on with

Administrator

privileges.

Insert the motherboard/system support DVD to the optical drive. The support DVD

automatically displays the

Drivers

menu if Autorun is enabled in your computer.

3. Click

ASPEED AST2300/AST2400 Display Driver

to begin the installation.

From the installation window, click

Next

to start the installation.

If Autorun is NOT enabled in your computer, browse the contents of the support DVD to

locate the file

ASSETUP.EXE

from the

BIN

folder. Double-click the

ASSETUP.EXE

to run

the support DVD.

Summary of Contents for RS720-E8-RS24-ECP

































































































































































































Search results

Summary of Contents for RS720-E8-RS24-ECP

Reviews:

Related manuals for RS720-E8-RS24-ECP

Brands by name

Popular brands

Asus RS720-E8-RS24-ECP, User Manual

Search results

Summary of Contents for RS720-E8-RS24-ECP

Reviews:

Related manuals for RS720-E8-RS24-ECP

Brands by name

Popular brands