manualshive.com logo in svg

Asus RS720-E8-RS24-ECP, User Manual

Share
Download
Asus RS720-E8-RS24-ECP User Manual Download Page 179

ASUS RS720-E8-RS24-ECP

7-17

7.4 Intel

®

 chipset device software installation

3. 

Click the item 

Intel Chipset Device Software

 from the menu.

This section provides the instructions on how to install the Intel

®

 chipset device software on 

the system.

You need to manually install the Intel

®

 chipset device software on a Windows

®

 operating 

system.
To install the Intel

®

 chipset device software:

1. 

Restart the computer, and then log on with 

Administrator

 privileges.

2. 

Insert the motherboard/system support DVD to the optical drive. The support DVD 

automatically displays the 

Drivers

 menu if Autorun is enabled in your computer.

If Autorun is NOT enabled in your computer, browse the contents of the support DVD to 

locate the file 

ASSETUP.EXE

 from the 

BIN

 folder. Double-click the 

ASSETUP.EXE

 to run 

the support DVD.

4. The 

Intel

®

 Chipset Device Software

 window appears. Click 

Next

 to start installation.

Summary of Contents for RS720-E8-RS24-ECP

































































































































































































Reviews:

No comments

Brands by name

Popular brands

Load more brands