manualshive.com logo in svg

Asus RS720-E7-RS24-EG, User Manual

Share
Download
Asus RS720-E7-RS24-EG User Manual Download Page 184

7-22

Chapter 7: Driver installation

7.5 

Installing the Intel

®

 I350-AM4/I350-AM2/I210  

 

Gigabit Adapter driver

This section provides the instructions on how to install the Intel

®

 I350-AM4/I350-AM2/I210 

Gigabit Adapter driver on the system.

To install the Intel

®

 I350-AM4/I350-AM2/I210 Gigabit Adapter driver on Windows

®

 Server 

2008 R2:

1. 

Restart the computer.

2.   Log on with Administrator privileges.
3. 

Insert the motherboard/system support DVD to the optical drive.

If Autorun is NOT enabled in your computer, browse the contents of the support DVD to 

locate the file 

ASSETUP.EXE

 from the 

BIN

 folder. Double-click the 

ASSETUP.EXE

 to run 

the support DVD.

4. 

Click Intel

®

 I350-AM4/I350-AM2/I210 

Gigabit Adapter Driver in the Drivers 

menu of the main screen to start the 

installation.

5. 

Click Next to continue. 

6. 

From the Program Maintenance window, 

select Modify then click Next.

Summary of Contents for RS720-E7-RS24-EG











































































































































































































Reviews:

No comments

Brands by name

Popular brands

Load more brands