Asus RS720-E7-RS24-EG User Manual Download Page 181

Page: 181 / 202

ASUS RS720-E7-RS24-EG

7-19

7.4

VGA driver installation

This section provides the instructions on how to install the ASPEED Video Graphics Adapter

(VGA) driver.
You need to manually install the ASPEED VGA driver on a Windows

operating system.

To install the ASPEED VGA driver:

Restart the computer, and then log on with Administrator privileges.

Insert the motherboard/system support DVD to the optical drive. The support DVD

automatically displays the Drivers menu if Autorun is enabled in your computer.

If Autorun is NOT enabled in your computer, browse the contents of the support DVD to

locate the file ASSETUP.EXE from the BIN folder. Double-click the ASSETUP.EXE to run

the support DVD.

Click the ASPEED AST2300 Display Driver to begin installation.

When the ASPEED Graphics installation wizard appears, click Next to start the

installation.

Summary of Contents for RS720-E7-RS24-EG











































































































































































































Search results

Summary of Contents for RS720-E7-RS24-EG

Reviews:

Brands by name

Popular brands

Asus RS720-E7-RS24-EG, User Manual

Search results

Summary of Contents for RS720-E7-RS24-EG

Reviews:

Brands by name

Popular brands