Asus RS520-E9-RS12-E User Manual Download Page 168

Page: 168 / 178

7-14

Chapter 7: Driver Installation

7.7

Intel

Rapid Storage Technology enterprise

installation

This section provides the instructions on how to install the Intel

Rapid Storage Technology

enterprise on the system.
You need to manually install the Intel

Rapid Storage Technology enterprise utility on a

Windows

operating system.

To install the Intel

Rapid Storage Technology enterprise utility:

Restart the computer, and then log on with

Administrator

privileges.

Insert the motherboard/system support DVD into the optical drive, and navigate to the

Utilities

menu.

Click the

Intel

Rapid Storage Technology enterprise

to begin installation.

4. The

Intel

Rapid Storage Technology enterprise

window appears. Click

Next

to start

the installation.

Summary of Contents for RS520-E9-RS12-E



















































































































































































Search results

Summary of Contents for RS520-E9-RS12-E

Reviews:

Related manuals for RS520-E9-RS12-E

Brands by name

Popular brands

Asus RS520-E9-RS12-E, User Manual

Search results

Summary of Contents for RS520-E9-RS12-E

Reviews:

Related manuals for RS520-E9-RS12-E

Brands by name

Popular brands