manualshive.com logo in svg

Asus RS520-E8-RS12-EV2, User Manual

Share
Download
Asus RS520-E8-RS12-EV2 User Manual Download Page 58

Chapter 3: Installation Options

3-2

3.1 

Tool-less Friction Rail Kit

The tool-less design of the rail kit allows you to easily install the rack rails into the server rack 
without the need for additional tools. The kit also comes with a metal stopping bracket that 
can be installed to provide additional support and stability to the server.

The tool-less rail kit package includes:

Installing the tool-less rack rail

To install the tool-less rack rails into the rack:

1.   Secure the two fixing latches to the two sides of the server using the set of latch  

screws.

The locations of the screw holes vary with different server models. Refer to your server user 
manual for details.

Fixing latches

Set of screws

Tool-less rack rail

Rail components (screws included)

Latch screws Rail Washers

Rail screws

Summary of Contents for RS520-E8-RS12-EV2















































































































































































































Reviews:

No comments

Brands by name

Popular brands

Load more brands