manualshive.com logo in svg

Asus RS520-E8-RS12-EV2, User Manual

Share
Download
Asus RS520-E8-RS12-EV2 User Manual Download Page 199

7-25

ASUS RS520-E8-RS8 V2, RS520-E8-RS12-EV2

7.7 Intel

®

 Rapid Storage Technology enterprise 4.0   

 installation

This section provides the instructions on how to install the Intel

®

 Rapid Storage Technology 

enterprise 4.0 on the system.

You need to manually install the Intel

®

 Rapid Storage Technology enterprise 4.0 utility on a 

Windows

®

 operating system.

To install the Intel

®

 Rapid Storage Technology enterprise 4.0 utility:

1. 

Restart the computer, and then log on with 

Administrator

 privileges.

2. 

Insert the motherboard/system support DVD to the optical drive, and find the utility 

menu.

3. 

Click the 

Intel

®

 Rapid Storage Technology enterprise 4.0

 to begin installation.

4. 

When the 

Welcome to the Setup Program

 appears, click 

Next

 to start the installation.

Summary of Contents for RS520-E8-RS12-EV2















































































































































































































Reviews:

No comments

Brands by name

Popular brands

Load more brands