manualshive.com logo in svg

Asus RS520-E8-RS12-EV2, User Manual

Share
Download
Asus RS520-E8-RS12-EV2 User Manual Download Page 188

7-14

Chapter 7: Driver Installation

7.2 

Management applications and utilities    

 installation

When you place the support DVD into the optical drive, the DVD automatically displays 

the main screen if Autorun is enabled in your computer. By default, the Drivers tab is 

displayed. 

If Autorun is NOT enabled in your computer, browse the contents of the support DVD to 

locate the file 

ASSETUP.EXE

 from the 

BIN

 folder. Double-click the 

ASSETUP.EXE

 to 

run the support DVD. 

7.3 

Running the Support DVD 

1. 

The contents of the support DVD are subject to change at any time without notice. 

Visit the ASUS website (www.asus.com) for the latest updates on software and 

utilities.

2. 

The support DVD is supported on Windows

®

 Server 2008 R2 and Windows

®

 

Server 2012.

The support DVD that is bundled with your motherboard contains drivers, management 
applications, and utilities that you can install to maximize the features of your 
motherboard. 

The main screen of the Support DVD contains the following tabs:

1. Drivers

2. 

Utilities

3.  

MakeDisk

4. Manual

5. Contact

The main screen of the Support DVD looks exactly the same on the Windows

®

 Server 

2008 R2 and on the Windows

®

 Server 2012 Operating System (OS). 

Summary of Contents for RS520-E8-RS12-EV2















































































































































































































Reviews:

No comments

Brands by name

Popular brands

Load more brands