Asus RS520-E8-RS12-EV2 User Manual Download Page 167

Page: 167 / 206

6-31

ASUS RS520-E8-RS8 V2, RS520-E8-RS12-EV2

6.3.6

Setting the Boot array in the BIOS Setup Utility

You can set the boot priority sequence in the BIOS for your RAID arrays when creating multi-

RAID using the Intel

Rapid Storage Technology enterprise SATA Option ROM utility.

To set the boot array in the BIOS:

Set at least one of the arrays bootable to boot from the hard disk.

Reboot the system and press <Del> to enter the BIOS setup utility during POST.

Go to the

Boot

menu and select the boot option priority.

Use up/down arrow keys to select the boot priority and press <Enter>. See the

Boot

menu

section of Chapter 4 for more details.

From the

Exit

menu, select

Save Changes & Exit

, then press <Enter>.

When the confirmation window appears, select

Yes

, then press <Enter>.

Summary of Contents for RS520-E8-RS12-EV2















































































































































































































Search results

Summary of Contents for RS520-E8-RS12-EV2

Reviews:

Related manuals for RS520-E8-RS12-EV2

Brands by name

Popular brands

Asus RS520-E8-RS12-EV2, User Manual

Search results

Summary of Contents for RS520-E8-RS12-EV2

Reviews:

Related manuals for RS520-E8-RS12-EV2

Brands by name

Popular brands