Asus RS520-E8-RS12-E User Manual Download Page 21

Page: 21 / 202

ASUS RS520-E8-RS8, RS520-E8-RS12-E

1-9

1.6

Internal features

The barebone server includes the basic components as shown.

Redundant power supply

Power supply fan

ASUS Z10PR-D16 Server Board

SATA/SAS back panel

Slim optical drive (optional)

System fans

Asset Tag

Hot-swap 3.5-inch HDD Bay

RS520-E8-RS8

The barebone server does not include a floppy disk drive drive. Connect a USB floppy disk

drive to any of the USB ports on the front or rear panel if you need to use a floppy disk.

*WARNING

HAZARDOUS MOVING PARTS

KEEP FINGERS AND OTHER BODY PARTS AWAY

Turn off the system power and detach the power supply before removing or replacing any

system component.

Summary of Contents for RS520-E8-RS12-E











































































































































































































Search results

Summary of Contents for RS520-E8-RS12-E

Reviews:

Related manuals for RS520-E8-RS12-E

Brands by name

Popular brands

Asus RS520-E8-RS12-E, User Manual

Search results

Summary of Contents for RS520-E8-RS12-E

Reviews:

Related manuals for RS520-E8-RS12-E

Brands by name

Popular brands