Asus RS500-E9 Series User Manual Download Page 137

Page: 137 / 166

6-11

ASUS RS500-E9 Series

6.2.6

Setting the Boot array in the BIOS Setup Utility

You can set the boot priority sequence in the BIOS for your RAID arrays when creating multi-

RAID using the Intel

Rapid Storage Technology enterprise SATA Option ROM utility.

To set the boot array in the BIOS:

Set at least one of the arrays bootable to boot from the hard disk.

Reboot the system and press <Del> to enter the BIOS setup utility during POST.

Go to the

Boot

menu and select the boot option priority.

Use up/down arrow keys to select the boot priority and press <Enter>. See the

Boot

menu

section of Chapter 4 for more details.

From the

Exit

menu, select

Save Changes & Exit

, then press <Enter>.

When the confirmation window appears, select

Yes

, then press <Enter>.

Summary of Contents for RS500-E9 Series







































































































































































Search results

Summary of Contents for RS500-E9 Series

Reviews:

Asus RS500-E9 Series, User Manual, Page: 137 / 166

Search results

Summary of Contents for RS500-E9 Series

Reviews: