Asus RS500-E9 Series User Manual Download Page 100

Page: 100 / 166

5-22

Chapter 5: BIOS Setup

5.4.10 CSM Configuration

CSM Support [Enabled]

This option allows you to enable or disable CSM Support.

Configuration options: [Disabled] [Enabled]

The following items appear only when you set the

CSM Support

[Enabled]

GateA20 Active [Upon Request]

This allows you to set the GA20 option.

[Upon Request]

GA20 can be disabled using BIOS services.

[Always]

Do not allow disabling GA20; this option is useful when any RT

code is executed above 1MB.

Option ROM Messages [Force BIOS]

This allows you to set the display mode for option ROM.

Configuration options: [Force BIOS] [Keep Current]

INT19 Trap Response [Immediate]

This option allows you to control the BIOS reaction on INT19 trapping by Option ROM.

[Immediate]

Execute the trap right away.

[Postponed]

Execute the trap during legacy boot.

[Auto]

Allow the system to determine automatically.

Boot Option filter [Legacy only]

This option allows you to control the Legacy/UEFI ROMs priority.
Configuration options: [UEFI and Legacy] [Legacy only] [UEFI only]

Network / Storage / Video [Legacy]

This option allows you to control the execution of UEFI and Legacy PXE/ Storage/

Video OpROM.

Configuration options: [UEFI ] [Legacy]

Summary of Contents for RS500-E9 Series







































































































































































Search results

Summary of Contents for RS500-E9 Series

Reviews:

Asus RS500-E9 Series, User Manual, Page: 100 / 166

Search results

Summary of Contents for RS500-E9 Series

Reviews: