Asus RS400-E8-PS2 User Manual Download Page 126

Page: 126 / 178

5-52

Chapter 5: BIOS setup

Pressing <Esc> does not immediately exit this menu. Select one of the options from this

menu or <F10> from the legend bar to exit.

5.12

Exit menu

The Exit menu items allow you to save or discard your changes to the BIOS items.

Save Changes & Reset

Exit System setup after saving the changes.

Discard Changes & Exit

Exit System setup without saving any changes.

Save Changes & Reset

Reset the system setup after saving the changes.

Discard Changes & Reset

Reset system setup without saving any changes.

Save Options
Save Changes

Save changes done so far to any of the setup options.

Discard Changes

Discard changes done so far to any of the setup options.

Summary of Contents for RS400-E8-PS2



















































































































































































Search results

Summary of Contents for RS400-E8-PS2

Reviews:

Related manuals for RS400-E8-PS2

Brands by name

Popular brands

Asus RS400-E8-PS2, User Manual

Search results

Summary of Contents for RS400-E8-PS2

Reviews:

Related manuals for RS400-E8-PS2

Brands by name

Popular brands