Asus RS300-E8 Series User Manual Download Page 145

Page: 145 / 160

ASUS RS300-E8 Series

7-19

7.5

Installing the VGA driver

This section provides the instructions on how to install the

ASPEED Video Graphics

Adapter (VGA)

driver.

To install the

ASPEED VGA

driver on Windows

Server 2008 R2:

Restart the computer.

Administrator

privileges.

Insert the Motherboard Support DVD to the optical drive.

The support DVD automatically displays the

Drivers

menu if Autorun is enabled in your

computer.

From the

Main Menu

, click

ASPEED

AST2300/AST1300 Display Driver

the

Drivers

tab to start the installation.

If Autorun is NOT enabled in your computer, browse the contents of the support DVD to

locate the file

ASSETUP.EXE

from the

BIN

folder. Double-click the

ASSETUP.EXE

to run

the support DVD.

From the

License Agreement

window,

select

I accept the terms

and click

Next

Summary of Contents for RS300-E8 Series

































































































































































Search results

Summary of Contents for RS300-E8 Series

Reviews:

Related manuals for RS300-E8 Series

Brands by name

Popular brands

Asus RS300-E8 Series, User Manual

Search results

Summary of Contents for RS300-E8 Series

Reviews:

Related manuals for RS300-E8 Series

Brands by name

Popular brands