Asus RS100-E6 PI2 User Manual Download Page 37

Page: 37 / 156

2-19

ASUS RS100-E6/PI2

2.7

Removable/optional components

You may need to remove previously installed system components when installing

or removing system devices. Or you may need to install the optional components

into the system. This section tells how to remove/install the following components:

1. System fans

2. Optical disk drive (optional)
3. ASUS ASMB4-iKVM (optional)

Ensure that the system is turned off before removing any components.

2.7.1

System fans

To remove the system fan:
1. Unplug the system fan cables from

the FRNT_FAN1 and FRNT_FAN2

connectors on the motherboard.

3. Remove the system fans, and then

set them aside.

2. Locate and remove the two system

fan screws. Keep the screws for

late use.

Follow the previous instructions

in reverse if you want to reinstall

the system fans.

Summary of Contents for RS100-E6 PI2





























































































































































Search results

Summary of Contents for RS100-E6 PI2

Reviews:

Related manuals for RS100-E6 PI2

Brands by name

Popular brands

Asus RS100-E6 PI2, User Manual

Search results

Summary of Contents for RS100-E6 PI2

Reviews:

Related manuals for RS100-E6 PI2

Brands by name

Popular brands