Asus RS100-E10-PI2, User Manual

Page: 31 / 166

2-13 ASUS RS100-E10-PI2
2.4 Hard disk drives
The server chassis has two HDD bays for installing HDDs to the system. Both HDD bays can
support 3.5-inch Serial ATA HDD.
2.4.1 Installing a hard disk drive to the HDD bay 1
To install a 3.5-inch Serial ATA HDD to HDD bay 1:
1. If you have an Optical Disc Drive (ODD) installed, remove it first before installing a 3.5-
inch Sertial ATA HDD to HDD bay 1.
To remove the ODD:
1.a Locate the ODD in the server chassis.
1.b Release the screw that secures the ODD to the chassis and set aside.
HDD bay 1
1.c Push the ODD outward slightly to
disconnect the SATA and power cable
from the ODD. Then, remove the
ODD as shown.