Asus RS100-E10-PI2, User Manual

Page: 125 / 166

ASUS RS100-E10-PI2 5-39
When Log is Full [Do Nothing]
Choose options for reacting to a full Smbios Event Log.
Configuration options: [Do Nothing] [Erase Immediately]
Smbios Event Log Standard Settings
Log System Boot Event [Enabled]
This option allows you to enable or disable logging System boot event.
Configuration options: [Disabled] [Enabled]
MECI [1]
This option allows you to set the number of occurrences of a duplicate event that must pass
before the multiple-event counter of log entry is updated. Use the <+> or <-> to adjust the
value. The values range from 1 to 255.
METW [60]
This option allows you to set the number of minutes which must pass between duplicate log
entries which utilize a multiple-event counter. Use the <+> or <-> to adjust the value. The
values range from 0 to 99.
Custom Options
Log EFI Status Code [Enabled]
This option allows you to enable or disable logging of the EFI Status Codes.
Configuration options: [Disabled] [Enabled]
The following item appears only when you set Log EFI Status Code to [Enabled] .
Convert EFI Status Codes to Standard Smbios Type [Disabled]
This option allows you to enable or disable converting of EFI Status Codes to Standard
Smbios Type (Not all may be translated).
Configuration options: [Disabled] [Enabled]
5.11.2 View Smbios Event Log
Press <Enter> to view all smbios event logs.