Asus RS100-E10-PI2, User Manual

Page: 124 / 166

5-38 Chapter 5: BIOS Setup
The following items appear only when you set Fan Speed Control to [Manual Speed
Mode] .
REAR_FAN1 / CPU_FAN1 / FRNT_FAN1-3 Duty% [50]
Allows you to set the desired POST Report waiting time from 1 to 10 seconds. Use the
<+> or <-> to adjust the value. The values range from 10 to 100.
5.10 Tool menu
ASUS EZ Flash
Allows you to run ASUS EZ Flash BIOS ROM Utility when you press <Enter>. Refer to the
ASUS EZ Flash Utility section for details.
5.11 Event Logs menu
The Event Logs menu items allow you to change the event log settings and view the system
event logs.
5.11.1 Change Smbios Event Log Settings
Press <Enter> to change the Smbios Event Log configuration.
All values changed here do not take effect until computer is restarted.
Enabling/Disabling Options
Smbios Event Log [Enabled]
Change this to enable or disable all features of Smbios Event Logging during boot.
Configuration options: [Disabled] [Enabled]
The following items appear only when you set Smbios Event Log to [Enabled] .
Erasing Settings
Erase Event Log [No]
Choose options for erasing Smbios Event Log. Erasing is done prior to any logging activation
during reset.
Configuration options: [No] [Yes, Next reset] [Yes, Every reset]