Asus RS100-E10-PI2, User Manual

Page: 103 / 166

ASUS RS100-E10-PI2 5-17
5.5.5 APM Configuration
Restore AC Power Loss [Last State]
When set to [Power Off], the system goes into off state after an AC power loss. When set
to [Power On], the system will reboot after an AC power loss. When set to [Last State], the
system goes into either off or on state, whatever the system state was before the AC power
loss.
Configuration options: [Power Off] [Power On] [Last State]
Power On By PCIE/PCI [Disabled]
[Disabled] Disables the PCI or PCIE devices to generate a wake event.
[Enabled] Enables the PCI or PCIE devices to generate a wake event.
Power On By RTC [Disabled]
[Disabled] Disables RTC to generate a wake event.
[Enabled] When set to [Enabled] , the items RTC Alarm Date (Days) and
Hour/Minute/Second will become user-configurable with set values.
Runtime Error Logging System Enabling [Enabled]
This item allows you to enable or disable Runtime Error Logging System.
Configuration options: [Disabled] [Enabled]
5.5.6 Runtime Error Logging Settings