Asus PRIME TRX40-PRO, Manual

Page: 79 / 100

PRIME TRX40-PRO
3-17
Chapter 3
3.6.10 Network Stack Configuration
The items in this menu allow you to enable or disable the UEFI network stack
When system is in sleep, hibernate or soft off states
This item allows you to turn the RGB LED lighting on or off when the system is in the
sleep, hibernate or soft off states.
Configuration options: [On] [Off]
3.6.9 APM Configuration
The items in this menu allow you to set system wake and sleep settings.
Restore On AC Power Loss
This item allows your system to go to ON state, OFF state, or both states after an AC power
loss. When setting your system to [Last State] , it goes to the previous state before the AC
power loss.
Configuration options: [Power On] [Power Off] [Last State]
ErP Ready
This item allows you to switch off some power at S4+S5 or S5 to get the system ready for
ErP requirement. When set to [Enabled] , all other PME options are switched off.
Configuration options: [Disabled] [Enable(S4+S5)] [Enable(S5)]
Power On By PCI-E
This item allows you to enable or disable the Wake-on-LAN function of the onboard LAN
controller or other installed PCI-E LAN cards.
Configuration options: [Disabled] [Enabled]
Power On By RTC
This item allows you to enable or disable the RTC (Real-Time Clock) to generate a wake
event and configure the RTC alarm date. When enabled, you can set the days, hours,
minutes, or seconds to schedule an RTC alarm date.
Configuration options: [Disabled] [Enabled]
3.6.11 AMD CBS
The items in this menu shows the AMD Common BIOS Specifications.
3.6.12 AMD PBS
The items in this menu shows the AMD PBS Setup Page.
3.6.13 AMD Overclocking
The items in this menu shows the AMD Overclocking Setup Page.