PE100A
55
3.12 Installing the terminal block
(optional)
You may install terminal blocks into the
Serial (COM) terminal connector
and
Isolated DIO connector
, which allow you to support additional devices
with serial ports or micro controllers by referring to the pin definitions and
connecting cables to the slots on the terminal blocks as needed.
IMPORTANT!
Connect only one (1) cable to a slot on the terminal
block.
NOTE:
• The terminal block is purchased separately.
• Please refer to
Rear view
for the location and pin definitions of the
Serial (COM) terminal connector
and
Isolated DIO connector
.
Installing a terminal block to the Serial (COM) terminal
connector
Summary of Contents for PE100A
