Asus PE100A, User Manual, Page: 50 / 80

50 PE100A
2. Prepare the RF connectors and cables.
3. Remove the rubber caps from the antenna holes.
4. Insert the antenna jack end of the RF connectors and cables into the
antenna jacks from within the chassis outwards.
5. Insert the bundled O-rings over the antenna jacks, and then secure the
antenna jacks using the bundled hex screws.
6. Thread the cables from both sides of the motherboard to the bottom of
the device.
Installing LTE and GPS antennas
NOTE: If your Embedded Computer came pre-installed with LTE and
GPS antenna jacks, skip to step 10.
1. Remove the front panel cover by removing the four (4) screws from the
cover.