Asus P9X79 WS User Manual Download Page 29

Page: 29 / 186

2.1

Before you proceed

Take note of the following precautions before you install motherboard components

or change any motherboard settings.

• Unplug the power cord from the wall socket before touching any

component.

• Before handling components, use a grounded wrist strap or touch a safely

grounded object or a metal object, such as the power supply case, to avoid

damaging them due to static electricity.

• Hold components by the edges to avoid touching the ICs on them.
• Whenever you uninstall any component, place it on a grounded antistatic

pad or in the bag that came with the component.

• Before you install or remove any component, ensure that the ATX power

supply is switched off or the power cord is detached from the power

supply. Failure to do so may cause severe damage to the motherboard,

peripherals, or components.

ASUS P9X79 WS

2-1

Summary of Contents for P9X79 WS



























































































































































































Search results

Summary of Contents for P9X79 WS

Reviews:

Asus P9X79 WS, User Manual, Page: 29 / 186

Search results

Summary of Contents for P9X79 WS

Reviews: