Asus P9D-MH series Page 58 User Manual Download

Page: 58 / 186

Chapter 4: Motherboard information

4-14

10. Power Supply SMBus connector (5-pin PSUSMB1)

This connector allows you to connect SMBus (System Management Bus) to the power

supply unit to read PSU information. Devices communicate with an SMBus host and/or

other SMBus devices using the SMBus interface.

This connector functions only when you install the ASUS ASMB7.

11. Hard disk activity connector (4-pin HDLED1)

This LED connector is for the storage add-on card cable connected to the SATA or SAS

add-on card. The read or write activities of any device connected to the SATA or SAS

add-on card causes the front panel LED to light up.

Summary of Contents for P9D-MH series



























































































































































































Search results

Summary of Contents for P9D-MH series

Reviews:

Related manuals for P9D-MH series

Brands by name

Popular brands

Asus P9D-MH series, User Manual

Search results

Summary of Contents for P9D-MH series

Reviews:

Related manuals for P9D-MH series

Brands by name

Popular brands