Chapter 2: BIOS information
2-3
• This function supports USB flash disks formatted using
FAT 32/16
on a single partition
only.
• DO NOT shut down or reset the system while updating the BIOS to prevent system boot
failure!
2.1.3
ASUS CrashFree BIOS 3 utility
The ASUS CrashFree BIOS 3 is an auto recovery tool that allows you to restore the BIOS file
when it fails or gets corrupted during the updating process. You can restore a corrupted BIOS
file using the motherboard support DVD or a USB flash drive that contains the updated BIOS
file.
Recovering the BIOS
To recover the BIOS:
1.
Turn on the system.
2.
Insert the support DVD into the optical drive or connect the USB flash drive that
contains the BIOS file to a USB port.
3.
The utility automatically checks the devices for the BIOS file. When found, the utility
reads the BIOS file and enters ASUS EZ Flash 2 utility automatically.
4.
The system requires you to enter BIOS Setup to recover BIOS settings. To ensure
system compatibility and stability, we recommend that you press <F5> to load default
BIOS values.
DO NOT shut down or reset the system while updating the BIOS! Doing so can cause
system boot failure!
3.
Press <Tab> to switch to the
Drive
field.
4.
Press the Up/Down arrow keys to find the USB flash disk that contains the latest BIOS,
and then press <Enter>.
5.
Press <Tab> to switch to the
Folder Info
field.
6.
Press the Up/Down arrow keys to find the BIOS file, and then press <Enter> to perform
the BIOS update process. Reboot the system when the update process is done.
• Before using this utility, rename the BIOS file in the removable device to
P8H61-M-LX2-R2-ASUS-0402.CAP
.
• The BIOS file in the support DVD may not be the latest version. Download the latest
BIOS file from the ASUS website at
www.asus.com.
Summary of Contents for P8H61 R2 USB3
Page 1: ...Motherboard P8H61 M LX2 R2 0 ...
Page 38: ...ASUS P8H61 M LX2 R2 0 1 28 ...