manualshive.com logo in svg

Asus P8B-C/4L, User Manual, Page: 165 / 184

Share
Download
Asus P8B-C/4L User Manual Download Page 165

ASUS P8B-C series

6-15

6.3 

LAN driver installation

This section provides the instructions on how to install the Intel

®

 Gigabit LAN 

controller drivers on the system.
You need to manually install the LAN contrroller driver on a Windows

®

 operating 

system.
To install the LAN controller drivers:
1.  Restart the computer, and then log on with 

Administrator

 privileges.

2.  Insert the motherboard/system support DVD to the optical drive. The support 

DVD automatically displays the 

Drivers

 menu if Autorun is enabled in your 

computer.

•  Windows

®

 automatically detects the LAN controllers and displays a New 

Hardware Found window. Click 

Cancel

 to close this window.

•  If Autorun is NOT enabled in your computer, browse the contents of the 

support DVD to locate the file 

ASSETUP.EXE

 from the 

BIN

 folder. Double-

click the 

ASSETUP.EXE

 to run the DVD.

3.  Click the 

Intel

® 

PRO/1000 Gigabit Adapters Driver

 to begin installation.

Summary of Contents for P8B-C/4L

























































































































































































Reviews:

No comments